What Anti-Tip Device Not Engaged Means
Bertazzoni's warning page is unambiguous: a range that has not been secured with its anti-tip device can be tipped over by children or adults, with fatal consequences. The device must be re-engaged any time the range is moved, and the range should not be operated at all without it in place.
Common Causes of Anti-Tip Device Not Engaged
- The range pushed back into place without the rear foot re-entering the bracket
- A bracket never fitted during the original installation
- A bracket fixed into flooring that has since been replaced or that no longer holds
🔧 One Safe Check You Can Try
Open the oven door and look behind the range at floor level, or shine a torch along the back foot, to see whether the bracket is actually over the range's rear leg. If the range has been pulled out for cleaning or a repair and pushed back without care, the bracket is very often sitting behind the leg rather than over it.
⚠ Why You Shouldn't Go Further Than That
- Do not use the oven or put weight on an open door until the bracket is confirmed engaged, because an open loaded oven door is the exact condition the device exists to counter.
- Fixing a bracket into laminate, a floating floor or tile without reaching something structural gives the appearance of security without the substance of it.
- Ranges are heavy and awkward to walk out and back on most kitchen floors, and a range dropped part-way damages the floor and the appliance together.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.


